LC4 CPL has a new high performance Water Leak Correlator that is able to locate leaks without having to shut down the system and can be used on any type or size of pipes. By placing sensors on two points of the pipe, the correlator is able to calculate how far the leak is from each point. Water leak noise correlation listens for water leak noises and calculates the distance to the leak. A leak in a pipe under pressure creates noise that travels through the pipe walls. The noise is detected at two separate points, (water valves, hydrants, meters) by highly sensitive microphones. Using the pipe diameter, pipe material and pipe length, the exact leak position can be calculated accurately and quickly.

There are many benefits to using a leak correlator. It is very useful in finding leaks on larger pipes such as mains in the streets, fire mains, large lines in MHP, and large commercial facilities.

LC5

 

The leak correlator can also work on low pressure leaks such as chilled and heated water lines. Leak Correlators also make it possible to listen to large sections of piping very quickly, making whole system surveys less manpower intensive. But the TRUE benefit of this particular water leak correlator is that the water does not have to be shut off to pinpoint the exact location of the leak.

 

For answers to your Leak Correlator or other Leak Detection questions, or to request service, CONTACT US TODAY!